Aluminium Alloy 7075 Wires, Aluminium Alloy AMS 4050 Wires
Aluminium Alloy 7075 Wires, Aluminium Alloy UNS A97050 Wires Supplier in India
JAGDISH METAL are producer of broad range 7075 Aluminium Alloy Wires and we additionally give our client most satisfiable esteem list for Aluminium Alloy.
Since it is less quench sensitive than most other aerospace alloys, this alloy maintains its strength properties in thicker sections while retaining good stress corrosion cracking resistance and fracture toughness levels.we offer Aluminium Alloy 7075 Wires in different sizes, thickness, standards and shapes as indicated by changed requirements given by our clients.
Specification Of Aluminium Alloy 7075 Wires
| Grade |
: |
Aluminium Alloy 7075 (UNS A97075) |
| Size Range |
: |
15NB to 150NB In |
| Width Range
| : |
900-1500 mm |
| Hardness
| : |
Soft, Hard, Half Hard, Quarter Hard etc. |
| Diameter of Wire
| : |
0.15 - 3.50 mm |
| Test Certificates |
: |
Manufacturer Test Certificate / Laboratory Test Certificate from Govt. Approved Lab |
Chemical Composition Of Aluminium Alloy 7075 Wires:
| Grade |
Element |
|
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
| 7050 |
0.12 |
0.15 |
2.0/2.6 |
0.10 |
1.9/2.6 |
0.04 |
5.7/6.7 |
0.06 |
Physical Composition Of Aluminium Alloy 7075 Wires:
| Properties |
Metric |
Imperial |
| Density |
2.6-2.8 g/cm3 |
0.0939-0.101 lb/in3 |
| Melting point |
494°C |
920°F |
Mechanical Properties Of Aluminium Alloy 7075 Wires:
| Properties |
Metric |
Imperial |
| Tensile strength |
515 MPa |
74695 psi |
| Yield strength |
455 MPa |
65992 psi |
| Fatigue strength |
240 MPa |
34809 psi |
| Elastic modulus |
70-80 GPa |
10153-11603 ksi |
| Poisson's ratio |
0.33 |
0.33 |
| Elongation |
11% |
11% |